Completed thesis projects
Below you find a selection of completed thesis projects at Sandvik.
|
Title |
University |
Year |
Business area |
| Aging of FeCrAl surface coating |
KTH Royal Institute of Technolog |
2019 |
Sandvik Materials Technology |
|
Crucial Parameters for Additive Manufacturing of Metals |
KTH Royal Institute of Technology/ |
2019 |
Sandvik Machining Solutions |
|
Optimization of annealing parameters for Sandvik 13C26 and 20C strip steels |
KTH Royal Institute of Technology |
2019 |
Sandvik Materials Technology |
|
Classifying Material Defects with Convolutional Neural Networks and Image Processing |
Uppsala University |
2019 |
Sandvik Machining Solutions |
| Improved interconnect materials for next-generation Solide Oxide Fuel Cells |
KTH Royal Institute of Technology |
2019 |
Sandvik Materials Technology |
|
Applicability of Planetary Boundaries to improve Sustainability Performance at Companies: A Case Study at Sandvik Materials Technology |
KTH Royal Institute of Technology |
2018 |
Sandvik Materials Technology |
|
Modeling and Analysis of the Shot Peening Process : a Study of the Residual Stresses in an Insert using the Finite Element Method |
Linnaeus University |
2018 |
Sandvik Machining Solutions |
|
Production and processability for future square shank tool holders |
Luleå University of Technology |
2018 |
Sandvik Machining Solutions |
|
After-market spare parts inventory centralization at Sandvik Mining and Rock Technology. |
Lund University |
2018 |
Sandvik Mining and Rock Technology |
|
Function Block Algorithm for Operation Planning on Cloud-DPP System : A case study of turbine disc from Sandvik Coromant |
KTH Royal Institute of Technology |
2018 |
Sandvik Machining Solutions |
|
Evaluating and Improving a Spare Parts Warehouse in the Mining Industry - A Case Study at Sandvik AB |
Lund University |
2018 |
Sandvik AB |
|
ISO ToolMaker application development |
KTH Royal Institute of Technology |
2017 |
Sandvik Machining Solutions |
|
Wear on Alumina Coated Tools and the Influence of Inclusions when Turning Low-Alloy Steels : Master Thesis - Chemical Engineering |
University of Uppsala |
2016 |
Sandvik Machining Solutions |
(source: uppsatser.se/om/Sandvik)